Exterior remodeling / Battlefield Home Builders
James Hardie
siding replacement.
From aging stone veneer to a new exterior. Repair the damage underneath, rebuild the wall layers, and finish with board-and-batten and lap siding.
See the transformationSpotsylvania, Virginia / Project story
More than a change
of siding.
This Spotsylvania home needed more than a new finish. Removing the stone veneer allowed long-term rot damage to be addressed before new sheathing and James Hardie siding were installed. The result combines vertical board-and-batten walls, horizontal lap siding, and coordinated trim.
The work behind the finish
Remove. Repair.
Rebuild. Reside.
A siding replacement is the time to deal with what the old exterior was hiding. Here is how this project moved from stone veneer to a new wall finish.
01 / Remove & repair
Open the walls. Address the rot.
The existing stone veneer was removed, exposing the wall assembly for repair. Rot that had developed over many years was addressed before the replacement exterior went on.
Hidden damage changes the scope of a siding project. Replacing the visible finish alone does not repair deteriorated material underneath it.
The next-stage photo shows new sheathing and housewrap after this repair phase.
02 / Rebuild the wall layers
New sheathing. Attention to water.
New sheathing provided the base for the replacement exterior. Housewrap and flashing followed, including the wall-base detail shown here.
The layers behind siding matter as much as the finish you see. Openings, transitions, and the bottom of the wall need attention before they are covered.
03 / Install the new exterior
Board-and-batten meets lap siding.
James Hardie siding replaced the old stone-veneer finish. Vertical board-and-batten gives the main walls a clear rhythm, while horizontal lap siding defines the gables.
Window surrounds, corners, and the transitions between siding styles bring the elevations together. The installation photos show the work as it progressed around the home.
Explore Hardie Plank
Around the home
One exterior.
Every elevation.
Project photos show the siding and trim across the front, rear, garage, and patio elevations. Some views were taken while installation and site cleanup were still in progress.
Can stone veneer be replaced with James Hardie siding?
Yes. This project replaced stone veneer with James Hardie siding. The work included removing the old finish, repairing long-term rot damage, and adding new sheathing before the new exterior was installed. Each home needs its own review of the underlying wall condition.
What happens if rot is found behind the old siding?
The repair scope needs to be addressed before covering the wall again. We discuss the damaged areas, the moisture concerns, and the work needed to prepare the wall for new sheathing and siding. The full extent may not be visible until the old cladding is removed.
Can we combine board-and-batten and horizontal lap siding?
Yes. This home combines a vertical board-and-batten pattern on the walls with horizontal lap siding at the gables. We can discuss which elevations, trim details, and material choices suit your home rather than repeating one pattern everywhere.
What affects the cost of replacing siding?
Wall area, removal of the existing finish, access, concealed damage, replacement sheathing, trim, and material selections all affect the scope. Share photos and your project location so we can discuss the existing exterior and the next step toward an estimate.
Your home's next exterior
Ready to replace
your siding?
Tell us about the current exterior, any visible damage, and the finish you have in mind. Include your city or county so we can discuss the project and next steps.
540-222-3355Siding replacement, exterior repairs, and coordinated home remodeling.
More remodeling services